I'm going back to using water in the water pan
-
RobinC
- Rubbed and Ready

- Posts: 802
- Joined: 21 Jan 2011, 10:11
- First Name: Robin Candy
- Location: Cheshire/Shropshire border
I'm going back to using water in the water pan
For the past few years I've always used water in the water pan in my WSMs. The cleanup has never bothered me so never felt the need to change. Recently I've tried some cooks with nothing in the water pan, just covered it with some foil. On all 3 cooks I got much more severe temp fluctuations than normal and had to play with the vents much more. I can see if you are using a forced draft system that this could work but think I will go back to using water
- keith157
- Moderator

- Posts: 3816
- Joined: 05 Aug 2011, 13:35
- First Name: Keith
- Location: Stevenage, Herts
Re: I'm going back to using water in the water pan
Thanks for the post, there have been several posts asking opinions on this topic more insight is always a welcome addition. I understand what you mean, regarding the use of forced air as I use an Ique and filled my bowl with sand with the top sealed with foil.
- London Irish
- Twisted Firestarter

- Posts: 259
- Joined: 07 Mar 2012, 12:30
- First Name: John Goulden
- Sense of Humor: A dry sense of humour and practical jokes!
- Location: Sidcup, Kent
Re: I'm going back to using water in the water pan
Yep, thanks for that Robin. I'm a new proud owner of a WSM (WHOOP WHOOP!!!!!!) and have been pondering lots of different methods including the water pan ideas, therefore I can strike this one off the list, ta. 
-
RobinC
- Rubbed and Ready

- Posts: 802
- Joined: 21 Jan 2011, 10:11
- First Name: Robin Candy
- Location: Cheshire/Shropshire border
Re: I'm going back to using water in the water pan
I think some people have had success with a clay saucer, I've never tried that. But for the time being I'm going back to water and I was getting consistent and reasonably stable temps with that.
-
Swindon_Ed
- Moderator

- Posts: 1265
- Joined: 14 Aug 2010, 18:48
- First Name: Ed Gash
- Location: Swindon
- Contact:
Re: I'm going back to using water in the water pan
If you've not tried a clay saucer i'd recomend it. It acts as a heat sink and it makes the WSM more stable than usign water, it also gets upto temp' quicker and recovers faster.RobinC wrote:I think some people have had success with a clay saucer, I've never tried that. But for the time being I'm going back to water and I was getting consistent and reasonably stable temps with that.
-
The Social Smokers
- Got Wood!

- Posts: 129
- Joined: 02 Nov 2011, 12:41
- First Name: Matt
- Location: Bristol, UK
Re: I'm going back to using water in the water pan
Swindon_Ed wrote:If you've not tried a clay saucer i'd recomend it. It acts as a heat sink and it makes the WSM more stable than usign water, it also gets upto temp' quicker and recovers faster.RobinC wrote:I think some people have had success with a clay saucer, I've never tried that. But for the time being I'm going back to water and I was getting consistent and reasonably stable temps with that.
Did you use one at Grillstock? I know Cuan did.
-
Swindon_Ed
- Moderator

- Posts: 1265
- Joined: 14 Aug 2010, 18:48
- First Name: Ed Gash
- Location: Swindon
- Contact:
Re: I'm going back to using water in the water pan
I always do, i haven't used water in my smokers for a couple of years now.The Social Smokers wrote:Did you use one at Grillstock? I know Cuan did.