Thermometer

The place to hang out and chat about anything and everything that doesn't fall under our other categories.

Thermometer

Postby bravehart » 04 Jun 2015, 08:40

I have a Weber 57cm Kettle. I see various references to cooking temperature. Is there a reasonable cost option for using a thermometer with my Weber. Also I will definitely be getting a meat probe for the internal temp of the meat, so any recommendations on that would also be gratefully received.
bravehart
Got Wood!
Got Wood!
 
Posts: 11
Joined: 03 Jun 2015, 12:39

Re: Thermometer

Postby JamsCowbell » 04 Jun 2015, 10:58

The best meat thermometer I've found is the ETI Superfast Thermapen. It really is good.

If you want to monitor your meat/grill temperatures without opening the lid then there are a number of options. I have a couple of the Maverick ET732 wireless things and they work well enough.
User avatar
JamsCowbell
Got Wood!
Got Wood!
 
Posts: 138
Joined: 15 Apr 2013, 10:00

Re: Thermometer

Postby wade » 04 Jun 2015, 12:17

The Maverick ET-732 and 733 are one of the ones most popular models used for BBQ - especially in the USA. With twin probes you can simultaneously monitor the internal temperature of both the Weber and the meat. These both have a wireless remote monitor, with great range, that lets you see the temperatures in the pit from the comfort of indoors.
http://www.amazon.co.uk/Maverick-ET732-Wireless-Smoker-Thermometer/dp/B004IMA718
http://www.amazon.co.uk/dp/B00GC53DYW?psc=1

There is now a new ET-735 that uses Bluetooth to link to a smartphone app, but this does have connectivity issues with some phones.

I have several of the ET-732/733s and they have all worked very reliably over several years
User avatar
wade
Got Wood!
Got Wood!
 
Posts: 248
Joined: 14 Aug 2011, 21:03
Location: Woodchurch, Kent

Re: Thermometer

Postby wade » 04 Jun 2015, 12:21

JamsCowbell wrote:The best meat thermometer I've found is the ETI Superfast Thermapen.


The Thermapens instant read thermometers are essential when cooking things like burgers and chicken pieces as you need to check the safely of the meat without it overcooking. They are also good as an additional check when cooking whole chickens and joints.
User avatar
wade
Got Wood!
Got Wood!
 
Posts: 248
Joined: 14 Aug 2011, 21:03
Location: Woodchurch, Kent

Re: Thermometer

Postby bravehart » 07 Jun 2015, 17:15

Thanks for the help. Took delivery of a Maverick ET 732 today. Did I read something about not crushing the wires in the lid or is it alright to route them out between the lid and the base.
bravehart
Got Wood!
Got Wood!
 
Posts: 11
Joined: 03 Jun 2015, 12:39

Re: Thermometer

Postby wade » 07 Jun 2015, 18:06

I have always just slipped the wires between the body and the lid without a problem. The important thing is to protect the joint where the cable connects to the probe fro water and fat and not to kink the cables when they are stored. Get in the habit of winding them loosely rather than just jumbling them up.
User avatar
wade
Got Wood!
Got Wood!
 
Posts: 248
Joined: 14 Aug 2011, 21:03
Location: Woodchurch, Kent


Return to Anything Butt

Who is online

Users browsing this forum: No registered users and 17 guests