Ash question on UDS

Please feel free to post reviews of new barbecues, gadgets and of course food. The opinions within the forum are not necessarily that of the web site owner!

Ash question on UDS

Postby aris » 27 Aug 2012, 18:33

I'm starting to season my UDS and noted when I took the lid off, all sorts of ash was flying about in the heat updraft.

Is this normal?

Also if I use a forced air type system - I'm thinking the air blowing in may stir up the ash too.

Lastly - does the ash in the basket end up choking the coal as it burns? I have seen some designs with a small rod attached to the coal basket to jiggle it about and loosten the ash - but is this really necessary or does it depend on the coal used?

Thanks!
aris
Rubbed and Ready
Rubbed and Ready
 
Posts: 1426
Joined: 06 Jul 2012, 13:18
Location: UK

Re: Ash question on UDS

Postby keith157 » 28 Aug 2012, 05:21

The Excel has a wide mesh basket for the charcoal so the ash tends to fall through, what have you used to hold your coals?
User avatar
keith157
Moderator
Moderator
 
Posts: 3816
Joined: 05 Aug 2011, 13:35
Location: Stevenage, Herts

Re: Ash question on UDS

Postby aris » 28 Aug 2012, 06:37

My mesh basket is wide too - but if it is piled deep - i'm wondering if that can be an issue or not.

When you open the lid, do you have bits of ash flying about inside?
aris
Rubbed and Ready
Rubbed and Ready
 
Posts: 1426
Joined: 06 Jul 2012, 13:18
Location: UK

Re: Ash question on UDS

Postby keith157 » 28 Aug 2012, 08:33

Nothing to speak of, but right or wrong I turn mu ProQue off so there is no air coming in.
User avatar
keith157
Moderator
Moderator
 
Posts: 3816
Joined: 05 Aug 2011, 13:35
Location: Stevenage, Herts

Re: Ash question on UDS

Postby Swindon_Ed » 28 Aug 2012, 10:37

I get this with my WSM's & ProQ and the way to stop it happening is to burp your smoker before you lift the lid off. So open the lid slightly for 10-20 seconds and then lift the lid completly, this will stop it from happening.
Swindon_Ed
Moderator
Moderator
 
Posts: 1265
Joined: 14 Aug 2010, 18:48
Location: Swindon

Re: Ash question on UDS

Postby keith157 » 28 Aug 2012, 11:59

Thanks for the tip
User avatar
keith157
Moderator
Moderator
 
Posts: 3816
Joined: 05 Aug 2011, 13:35
Location: Stevenage, Herts

Re: Ash question on UDS

Postby stretchie_ » 28 Aug 2012, 15:25

My ash basket is 13" across and 11" deep, that's just the basket, it sits on top of 6" legs, I started off with 3" legs but found that an overnight burn did choke the coals with ash, but had no problems with the longer legs.

Look at my other posts for pics on what I did. As for ash, yeah, you're going to get some drifting about, or at least I do. Doesn't stop the food being awesome though. :D
User avatar
stretchie_
Twisted Firestarter
Twisted Firestarter
 
Posts: 370
Joined: 04 Jul 2012, 10:48
Location: Melksham, Wiltshire

Re: Ash question on UDS

Postby aris » 31 Aug 2012, 11:50

My basket is about 17" across and 14" high. Is this too big? :)

I could cut some off the top - but i'm not sure it is necessary as I will not be filling it up with coal.
aris
Rubbed and Ready
Rubbed and Ready
 
Posts: 1426
Joined: 06 Jul 2012, 13:18
Location: UK

Re: Ash question on UDS

Postby stretchie_ » 12 Sep 2012, 13:27

I've just put some weld mesh at an angle in the bottom of the coal basket so the very bottom part forms a V to keep the very last of the coals together rather than let them spread out.
User avatar
stretchie_
Twisted Firestarter
Twisted Firestarter
 
Posts: 370
Joined: 04 Jul 2012, 10:48
Location: Melksham, Wiltshire


Return to Barbecue Reviews

Who is online

Users browsing this forum: No registered users and 6 guests