Page 1 of 2

Cold smoking with the WSM

PostPosted: 06 Nov 2015, 17:27
by gavinbbq
Hi

I am curing a belly of pork this week to make bacon and am going to cold smoke it after using the Pro-Q CSG in my WSM and just wandered if anyone had some advice with vent settings on the WSM while cold smoking?

Thanks in advance
Gav


Sent from my iPhone using Tapatalk

Re: Cold smoking with the WSM

PostPosted: 06 Nov 2015, 19:06
by essexsmoker
Never done it and don't have a WSM but shut vents down just enough to stop burning. You want smouldering not flames.

Re: Cold smoking with the WSM

PostPosted: 06 Nov 2015, 23:35
by gavinbbq
Yeah I was thinking of just having one vent open just a little with the top open a smidgeon to maximise smoke exposure


Sent from my iPhone using Tapatalk

Re: Cold smoking with the WSM

PostPosted: 07 Nov 2015, 21:43
by essexsmoker
I'd open them all up, start it up and see what happens. If it flames turn all inlets down a smidge and just keep adjusting.

Re: Cold smoking with the WSM

PostPosted: 08 Nov 2015, 08:27
by essexsmoker
Try it without food in first.

Re: Cold smoking with the WSM

PostPosted: 11 Nov 2015, 13:32
by GingerBen
I use my Pro-Q CSG in a WSM and have so far done just cheese and nuts in it. I don't know how familiar you are with the Pro-Q CSG but if you use the candle to get it smoldering (about 2 mins or so) then take it out it will just smolder away until you put it out or it burns out. I've never seen a flame out of it and wouldn't expect to from saw dust.

Regarding the venting I opened all 3 bottom vents and the top vent fully on mine. From what I read you don't want stale smoke lingering in the chamber, you want a nice flow of fresh smoke passing over the food and out the top.

My results with cheese and nuts have been good using this method but I haven't tried cold smoking meat yet - bacon is next on my list!

Re: Cold smoking with the WSM

PostPosted: 11 Nov 2015, 15:07
by gavinbbq
Thanks GingerBen that's just what I was wanting to hear. My bacon should have finished curing tomorrow so after a couple more days drying out in the fridge will hopefully be cold smoking it on Sunday.


Sent from my iPhone using Tapatalk

Re: Cold smoking with the WSM

PostPosted: 11 Nov 2015, 15:38
by GingerBen
gavinbbq wrote:Thanks GingerBen that's just what I was wanting to hear. My bacon should have finished curing tomorrow so after a couple more days drying out in the fridge will hopefully be cold smoking it on Sunday.


Sent from my iPhone using Tapatalk


No worries, let us know how you get on. One thing I have noticed is that the ProQ doesn't put out a lot of smoke so depending on your tastes be prepared to smoke that bacon for quite a while. I've been doing cheddar for up to 6 hours to get the level of smoke I like. How long were you planning to smoke it for?

Re: Cold smoking with the WSM

PostPosted: 11 Nov 2015, 16:20
by TakingtheBrisket
If you have any trouble getting the dust going give it a blast (not csg!) in microwave or in the oven

Re: Cold smoking with the WSM

PostPosted: 11 Nov 2015, 19:37
by gavinbbq
Cheers guys. I was planning on smoking the bacon for 12 hours.


Sent from my iPhone using Tapatalk