British BBQ Society Forums

Well i put her together today Grate is 8 inch from top 24in from charcoal grate bottom which is 2inch off bottom
i got 3 3/4in air vents and cap and a 3/4in ball valve . Lid has got 4 3/4in holes in which i hope to be adding
weber dome lid if i win one on ebay then i can add a second shelve 1in from top .

Term added 1in above grate to give a reading near meat i also adding a small hole for my probe wire for
my electic termo. Charcoal grate is a pro q charcoal holder . as i had a real prob finding expanded metal
and when i did the size and cost of sheet was not practical .

anyways time for a beer now and planning first cook.

Sanded and pre spray


4X 3/4in vents added


Ball Valve added


Grill added 8 in from top


Termo added 1inch above cooking grate


Final added 4 x 3/4 vents in lid

Looking good, keep us in the loop, and don't forget the invites to the inaugural cook

Thanks

will be modding going to add second shelve 1in from top as i just won a Weber One Touch Premium 57 Barbecue Lid
on ebay for 18£

That looks awesome!
Look forward to seeing how it cooks. I was toying with the idea of making one of these a while ago.
Cheers
Marcus