GMG DB

[essexsmoker]

I believe the app checks in less frequently than the beast checks itself, so if you are watching the beast you will see it overshoot by a couple of degrees and then go into breathe mode then it will drop a couple of degs under before it brings it back up again. Because the app checks less frequently it tends to just show the set point, not sure it matters that much......

Cheers
Tiny

Hi Tiny,

I only noticed because it was 25f different and the gmg never changes at all.

It's quite a small difference in the grand scheme of things, only 4C. Also, at that temp it only goes up in 5 degrees.

Just wanted to check that the reading was supposed to be live.

Thanks for the reply.

[essexsmoker]

Hi All,

I've just finished a long cook on the DB and was about to cover it up. I checked all around the body to make sure it was cool enough. I don't normally check underneath but thought I would just in case. To my shock I found flakes of paint in my hand!

I then crawled underneath to look and found this:


https://drive.google.com/file/d/0B0oXcy ... p=drivesdk


I don't know if this has been like it a while or just after this long cook.

It's only on one side which is weird.

So, my question is, has anyone else had or heard of this?

I wouldn't have even known had I not checked the temp. The rest of the bodywork seems fine. I've not checked the inside yet as it started to spit so I covered up quick.

Needless to say I'm a bit gutted, I've only used it 4 or 5 times!

I've mailed ABBQ about this, so fingers crossed it will get sorted fairly soon.