British BBQ Society Forums

Hi all,

I recently got a Q2200 to go along with my coal BBQ.

Can anyone advise on how to connect this type of bottle http://gasdeal.co.uk/47kg-propane-gas-cylinder/ to this type of BBQ and connector please?

Really struggling to to find any information on this though I'm sure it must be possible.

Thanks very much

j

Hi Jim,

I know the Weber gas bbqs come with regulators that are designed to connect to a Calor patio gas type bottle, using the 27mm clip on connector. Theres quite a bit of info here on the Weber Q bbqs https://www.bbqs2u.co.uk/blog/weber-q-b ... 00-bbqs-n9


This product should attach to your large 47kg bottle https://thegascentre.co.uk/propane-regu ... Gwodpl4OCg

You'll then need to remove Weber's regulator from the rubber hose and attached the hose directly to that product with a jubile clip.

Probably best to talk a local gas centre to confirm with a professsional, but i'm sure Weber gas bbqs use a pressure of 37Mbar.

Hope that helps, you'll cook a lot of food with that gas bottle!