Modifying gas connector for Weber Q2200

Feel free to ask any questions, one of the experts will certainly respond, don't be afraid to ask anything, we were all beginners at some point.

Modifying gas connector for Weber Q2200

Postby jurassicjim » 21 Apr 2017, 15:42

Hi all,

I recently got a Q2200 to go along with my coal BBQ.

Can anyone advise on how to connect this type of bottle http://gasdeal.co.uk/47kg-propane-gas-cylinder/ to this type of BBQ and connector please?

Really struggling to to find any information on this though I'm sure it must be possible.

Thanks very much

j
jurassicjim
Still Raw Inside
Still Raw Inside
 
Posts: 1
Joined: 21 Apr 2017, 15:36

Re: Modifying gas connector for Weber Q2200

Postby SmokeyBBQYum » 27 Apr 2017, 14:49

Hi Jim,

I know the Weber gas bbqs come with regulators that are designed to connect to a Calor patio gas type bottle, using the 27mm clip on connector. Theres quite a bit of info here on the Weber Q bbqs https://www.bbqs2u.co.uk/blog/weber-q-b ... 00-bbqs-n9


This product should attach to your large 47kg bottle https://thegascentre.co.uk/propane-regu ... Gwodpl4OCg

You'll then need to remove Weber's regulator from the rubber hose and attached the hose directly to that product with a jubile clip.

Probably best to talk a local gas centre to confirm with a professsional, but i'm sure Weber gas bbqs use a pressure of 37Mbar.

Hope that helps, you'll cook a lot of food with that gas bottle!
SmokeyBBQYum
Got Wood!
Got Wood!
 
Posts: 38
Joined: 10 Sep 2012, 12:08


Return to New To BBQ/Smoking - Help & Advice

Who is online

Users browsing this forum: No registered users and 5 guests