UDS Drum

Feel free to ask any questions, one of the experts will certainly respond, don't be afraid to ask anything, we were all beginners at some point.

UDS Drum

Postby trebor127 » 08 Mar 2015, 19:06

Thinking of building a UDS over the next few weeks but obviusly need a drum...

Come accross http://www.ebay.co.uk/itm/205-LITRE-45-GALLON-STEEL-DRUM-BARREL-CONTAINER-FOR-SHIPPING-WASTE-FEED-BIN-/261107560726? but they say that they are lacquered on the inside. I assume that when I do a 'burn' in the drum this will remove any lacquer which was there. I guess that they use lacquer to stop them rusting?

Cheers

Rob
trebor127
Got Wood!
Got Wood!
 
Posts: 22
Joined: 25 Jun 2014, 18:25

Re: UDS Drum

Postby YetiDave » 09 Mar 2015, 06:58

Yep, it should burn right off!
YetiDave
Rubbed and Ready
Rubbed and Ready
 
Posts: 721
Joined: 28 Jun 2012, 19:30
Location: Manchester

Re: UDS Drum

Postby trebor127 » 09 Mar 2015, 15:25

Cool, will get one ordered.

Got some wood from http://bbqsmokingwood.co.uk on order in preparation.
trebor127
Got Wood!
Got Wood!
 
Posts: 22
Joined: 25 Jun 2014, 18:25

Re: UDS Drum

Postby YetiDave » 09 Mar 2015, 15:43

Sounds good! Be very very very very careful with that lid though when you're burning - too much heat and it'll warp. Might be an idea to take a blowtorch to it instead
YetiDave
Rubbed and Ready
Rubbed and Ready
 
Posts: 721
Joined: 28 Jun 2012, 19:30
Location: Manchester

Re: UDS Drum

Postby trebor127 » 09 Mar 2015, 17:08

Hmm not got a blow torch...

I thought that you burn with the lid off...
trebor127
Got Wood!
Got Wood!
 
Posts: 22
Joined: 25 Jun 2014, 18:25

Re: UDS Drum

Postby YetiDave » 10 Mar 2015, 10:40

Yeah you do burn it with the lid off :lol: You might want to strip the liner/paint from the lid too is all. Just don't do what a lot of people make the mistake of doing and put the lid on top of a blazing hot barrel fire
YetiDave
Rubbed and Ready
Rubbed and Ready
 
Posts: 721
Joined: 28 Jun 2012, 19:30
Location: Manchester

Re: UDS Drum

Postby trebor127 » 10 Mar 2015, 11:43

Ahh get you now! See you're in Manchester... Don't recommend any butchers?
trebor127
Got Wood!
Got Wood!
 
Posts: 22
Joined: 25 Jun 2014, 18:25

Re: UDS Drum

Postby YetiDave » 10 Mar 2015, 12:36

High Street Meat Market in the Arndale - by far the best and cheapest butchers I've come across :) Also a lovely chap named Seth from Alderwood Tree Care was able to supply myself and another member of this forum with some very large nets of smoking wood. I paid £9 for about 30kg of seasoned cherry logs. If you don't mind splitting them yourself (it's a good excuse to buy an axe..) then I doubt you'll find a cheaper wood supply anywhere either
YetiDave
Rubbed and Ready
Rubbed and Ready
 
Posts: 721
Joined: 28 Jun 2012, 19:30
Location: Manchester

Re: UDS Drum

Postby trebor127 » 11 Mar 2015, 09:47

Will try it out when I'm next in town. Hopefully I'll find one easier to get to in the Altrincham area.

Going to practice various cuts on my weber one touch with smokenator before I go all in with a smoker...
trebor127
Got Wood!
Got Wood!
 
Posts: 22
Joined: 25 Jun 2014, 18:25

Re: UDS Drum

Postby aris » 12 Mar 2015, 11:45

I'm not 100% convinced that the liner needs burning off. That lining is pretty resilient and if your drum was designed to be used for foodstuffs (many of them hold fruit plups) then it is already fairly inert and non-toxic. I think if it is seasoned well enough that it should be fine as is. The smoky oily seasoning will coat the liner. Just my opinion :)
aris
Rubbed and Ready
Rubbed and Ready
 
Posts: 1426
Joined: 06 Jul 2012, 13:18
Location: UK

Next

Return to New To BBQ/Smoking - Help & Advice

Who is online

Users browsing this forum: No registered users and 13 guests

cron