WANTED: Rotisserie for 57CM Kettle

Do you have a BBQ item that you don't need and want to sell? Or are you desperately looking for something that you can't find. Post your sales and wanted notices here.

WANTED: Rotisserie for 57CM Kettle

Postby hifigary » 02 Jan 2015, 20:30

As title says - keep being told by the South Africans at work that I need a Rotisserie, so, does
anyone have one for sale to fit a Weber 57CM? Or is there a compatible one that does not cost
the earth?

Gary
hifigary
Got Wood!
Got Wood!
 
Posts: 60
Joined: 19 Jan 2012, 12:55

Re: WANTED: Rotisserie for 57CM Kettle

Postby BraaiMeesterWannabe » 03 Jan 2015, 09:45

Weber do one but it's not cheap http://www.wowbbq.co.uk/products/weber- ... 22274.html

Alternatively you could buy a stacker (something like this http://www.barbecuestacker.com), and then adapt it yourself to take something like this http://www.amazon.co.uk/broil-master®-BBQG04-ZBH-02-Rotisserie-Spit-Grill/dp/B008YA34OW/ref=sr_1_4?ie=UTF8&qid=1420278023&sr=8-4&keywords=bbq+rotisserie+spit

Still not cheap, but cheaper than the Weber one with the added benefit that you'll be able to use your kettle as a smoker :D

Finally, rotisserie systems do come up on e-bay from time to time.
User avatar
BraaiMeesterWannabe
Rubbed and Ready
Rubbed and Ready
 
Posts: 539
Joined: 02 Sep 2014, 08:51
Location: Dorset UK

Re: WANTED: Rotisserie for 57CM Kettle

Postby AlanL » 03 Jan 2015, 13:49

There's no question the Weber Rotisserie is not cheap but after trying out an alternate for my Spirit Gasser I ended up getting the Weber one. The alternate was about 1/2 the price but in my opinion was far too noisy which would have been annoying when sitting by the BBQ with guests and chatting. Just something to be aware of and see if you can see in action before you buy.

I love cooking with the Rotisserie as Lamb and Chicken come off great.

The Rotisserie for the Charcoal BBQ works out particularly expensive as you need the additional spacer ring to support the Rotisserie and give you the capacity. So unless you make your own spacer I don't think any option will be cheap.

As BMW says keep an eye on eBay or the other BBQ forums.

If Weber could reduce the cost then they would sell lots of these and probably make as much money overall due to volume of sales. It's one of the most desirable accessories but least purchased because of the cost.
User avatar
AlanL
Got Wood!
Got Wood!
 
Posts: 59
Joined: 29 May 2012, 18:03

Re: WANTED: Rotisserie for 57CM Kettle

Postby hifigary » 03 Jan 2015, 16:10

Thanks for the replies looks like it will be a weber one
hifigary
Got Wood!
Got Wood!
 
Posts: 60
Joined: 19 Jan 2012, 12:55


Return to Member Sales/Wanted

Who is online

Users browsing this forum: No registered users and 5 guests